Nevada Backroaders

my rear axle is going to hell in a handbasket. first a sheard axle now the locker is trying to shear the other axle, need a bolt in 35.

I'm thinking Jeepin Joe may have one of these. Not 100% sure though.

_________________
Just another day in paradise
http://www.cardomain.com/ride/2144037

I know Ed B. has one sitting in his yard. It came from JJ's Jeep.

_________________
"I'm not sure where the trail went, but I've got a Jeep and gas so who cares"

Rubicon Bob
Club President
Rescue Ranger
NBMC / NBCC
03 Rubi/2017 Grand Cherokee
2020 Gladiator Launch Edition

beerman, send me a pm, i am not sure of gearing, but have a complete axle, i also have a limited slip carrier and axles for same that is for sale

ed

_________________
2008 JKU
rescue ranger
nbrcc
nbrmc
nbrofc

Yeah I have one, too. It's out of a 02 Jeep I-6 and 5-speed. May have 3.07 gears...at least that's my guess. Auto's usually had 3.73's and manual's had 3.07 I think.

_________________
2002 Jeep Wrangler X, ARB's, 4.5" RE lift, 35" KM2's, built to crawl on rocks

which one of you just wants to get rid of it?!

let me know what your asking prices are, definitely need this guys, jeep has just been sitting in the driveway crying.

the gearing on that axle is 3.73, Ed.

_________________



ɹǝʌo ǝɯ ןןoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

I have been having some of the same issues.
I found a bolt in D44 from a Jeep Sport.

I am installing a detroit in it and disk brakes.
Then it will bolt right in and be much stronger than the stock 35 ever could think of being.

You can also order a Ford 9 inch from the east coast gear supply for like $600.

Todd

_________________
Member of the following:
BRC, Cal4Wheel, and my local clubs.