Nevada Backroaders
http://nevadabackroaders.com/phpbb3/

Work party soon?
http://nevadabackroaders.com/phpbb3/viewtopic.php?f=12&t=886		 Page 1 of 3
Author:  Justin [ Wed Dec 27, 2006 12:01 pm ]
Post subject:  Work party soon?
Going to look at small breather filters when i get a chance. I had the intake cleaned before our trip and now want to get the oil breather out of my intake as well as the vent mods Andy mentioned. Also need to cut/grind the bolts on the oil skid to get it off and change the trany fluid. Then new bolts to reinstall (old ones are stripped). Maybe a radiator repacement as well. I'll wait for Andy on that one :wink: . :roll: The JEEP THING is going on with my radiator :evil: . Leaks just enough to be annoying. Like a Harley :roll: .
My dad said Plastic?!?!?!?! What the?!?!?!. I just told him, it's a Jeep thing don't try to understand. Now he's looking for an old Jeep to play with.

Brad, where did you get your radiator from with the good price? If the price is still good I will pick one up to have it ready for the next party.
Author:  Justin [ Wed Dec 27, 2006 12:12 pm ]
Post subject: 
I meant soon as in sometime before Summer, so there is time for others to get projects together. Or until my radiator fails. 8)
Author:  PinzEOD [ Wed Dec 27, 2006 12:57 pm ]
Post subject:  Re: Work party soon?
Justin wrote:
snip>Brad, where did you get your radiator from with the good price? If the price is still good I will pick one up to have it ready for the next party.
Try 1-800-RADIATOR. They have a warehouse in town, same day delivery/pick-up. I bought their Heavy Duty replacement for my Cherokee and as I recall the price was VERY reasonable.
Author:  brad/duuuude [ Wed Dec 27, 2006 3:12 pm ]
Post subject: 
it's performance radiator @ 5070 s. arville #2, phone number 365-8120, website is www.performanceradiator.com. the one you want is a 2 core with steel tanks and brass core that fits yj's & tj's, stick or auto. 8)
Author:  John and Chris [ Wed Dec 27, 2006 7:06 pm ]
Post subject:  Work Party
Justin...

Seems like a lot of repairs and mods. Wouldn't it be easier to raise the body and slip a new jeep under it. :roll: Just kidding. Actually, I do have one or two things I could get done. If Ed's garage is open for business, I'm in. 8)

John
Author:  JC & MC [ Thu Dec 28, 2006 11:33 am ]
Post subject:  Jeep Build
Hey can I help???
Author:  Navy-Jeepster [ Thu Dec 28, 2006 4:59 pm ]
Post subject:  Re: Work Party
John and Chris wrote:
Justin...

Seems like a lot of repairs and mods. Wouldn't it be easier to raise the body and slip a new jeep under it. :roll: Just kidding. Actually, I do have one or two things I could get done. If Ed's garage is open for business, I'm in. 8)

John


Justin would not want to do this!
It would remove all his preplaced mud to help hide the other leaks he does not tell anyone about.

hehe

Todd
Navy-Jeepster
Author:  ed beaumont [ Thu Dec 28, 2006 5:37 pm ]
Post subject:  work party soon?
allright, allright If there is this much interest in getting some work done I guess that I can make it so. The earliest that I can even find my garage floor is the 27th of January. To many projects going, and to much junk. If this date works and you want to work on your rig or someone elses just post up. I got stuff to do to my rig, might find time as I clean the garage, or not. Let me know if this is a good date

ed
Author:  John and Chris [ Thu Dec 28, 2006 7:00 pm ]
Post subject:  Work Party
Ed...

At this point the 27th sounds good for me. I still have that skid plate to install under the oil pan. 8)

However, don't go out of your way. I'm in no hurry. If the 27th is too soon, I can wait. Let me know. :wink:

John
Author:  JC & MC [ Thu Dec 28, 2006 11:18 pm ]
Post subject:  Garage
Ed if ya need a strong (kinda) back and a weak mind to help cleanup let me know.
Author:  Justin [ Fri Dec 29, 2006 11:21 am ]
Post subject: 
:? Radiators for 4.0L Jeep Wranglers YJ/TJ

Performance Radiator 5070 s. arville 365-8120
quoted $160+tax for the all metal 2 row. :? $169 for the plastic tanks 1 row. Haha :lol:


1-800-RADIATOR 3245 E. Patrick
quoted $154+tax for all metal 2 row. :D


E. Patrick also happens to be closest to me. 8)
Author:  Justin [ Fri Dec 29, 2006 1:05 pm ]
Post subject:  Re: Jeep Build
jc wrote:
Hey can I help???


John, you're always welcome to work on Lizzy. :wink:

And thank you Ed.
Author:  Justin [ Sun Dec 31, 2006 7:37 pm ]
Post subject: 
I have a radiator in a box :P . Looking forward to the work party 8) . There went my incintive check from the company. :evil:
Author:  jimmie99 [ Sun Dec 31, 2006 7:50 pm ]
Post subject: 
If you guys need anyone to help let me know. (817) 501-6187 I am free that day. Just a note I do not have a whole lot of exp. am willing the lend a hand.
Author:  Bill [ Mon Jan 01, 2007 9:27 pm ]
Post subject: 
I installed one of those 3 core metal radiators in my XJ last summer and never had any cooling issues since.
Page 1 of 3 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/