Nevada Backroaders
http://nevadabackroaders.com/phpbb3/

Work Party March 26
http://nevadabackroaders.com/phpbb3/viewtopic.php?f=12&t=2977		 Page 1 of 1
Author:  Justin [ Mon Mar 14, 2011 11:21 am ]
Post subject:  Work Party March 26
The Department of Wrenching
under the leadership of Ed Beaumont
and his deputy Duncan
is happy to announce

Saturday March 26, 2011

Ed's Magic 4x4 Garage. :wink:

Standard Backroaders Jeep party for maint, repair, inspection or installs. Please post what you would like to get done so we can prepare and budget time (ie. TJ full 4" lift aprox 3-4 hours). Services done on your vehicle will cost your share of doughnuts, coffee, pizza and refreshments for the crew (no alchohol).

This is self service plus. Owner is expected to wrench based on skill level and be responsible for vehicle. Please only bring needed specialty tools not available at Ed's magic garage to prevent mixing and loss of tools. Please show up with all parts and hardware for your project. If not sure about a project or tools ask the Backroader's Unofficial Master Mechanic (Ed).

Volunteer wrenchers are welcome.

As this is Ed's Private garage he has final say in all activity.
Author:  Justin [ Mon Mar 14, 2011 11:34 am ]
Post subject:  Re: Work Party March 26
2000 Jeep TJ
I will be installing Front Brake Rotors/Pads and a Trailer Wiring Harness.

rotors
http://www.quadratec.com/products/56215_8003.htm
pads
http://www.quadratec.com/products/56214_100.htm
speed bleeders
http://www.quadratec.com/products/56202_101.htm
wiring
http://www.quadratec.com/products/92015_04.htm

Planning on doing more towing for hunting and camping.
brakes are worn out. :shock: and time to fix the makeshift wiring.
Author:  Rubicon Bob [ Mon Mar 14, 2011 2:23 pm ]
Post subject:  Re: Work Party March 26
Are you going to finally wiring the windshield lights also???
Author:  Justin [ Tue Mar 15, 2011 6:04 am ]
Post subject:  Re: Work Party March 26
Yeah, there is that too :oops:
Author:  brad/duuuude [ Tue Mar 15, 2011 10:03 pm ]
Post subject:  Re: Work Party March 26
Depending on when I get the new rear springs for D.D. could we fit in a spring-ectomy?
Author:  ed beaumont [ Wed Mar 16, 2011 7:28 am ]
Post subject:  Re: Work Party March 26
For you brad no just kidding of course we can do a spring transplant or springectomy dont matter what you want to call it we can do it. we have the tools and technology all we need is motovation hopefully see you either way

ed
Author:  Rubicon Bob [ Wed Mar 16, 2011 6:23 pm ]
Post subject:  Re: Work Party March 26
I agree that we have the tools. But having the technology, that might be a stretching of the truth. Motivation, well we definately need some motivation. Either way, we will stumble our way through it. :lol: :lol: :lol: I should be there.
Author:  Justin [ Thu Mar 17, 2011 6:41 am ]
Post subject:  Re: Work Party March 26
Caffinated Liquid Motivation will be on my list 8)
Author:  bethseptember [ Fri Mar 18, 2011 3:53 pm ]
Post subject:  Re: Work Party March 26
caffeine, chocolate, grease(not just 40w), sugar, pizza, etc, i'll be there.
you never know when a medicallprofessional will be needed to say, "yup, that's gonna leave a mark"
Author:  ed beaumont [ Fri Mar 25, 2011 7:16 am ]
Post subject:  Re: Work Party March 26
we are still on for Saturday. weather looks good just a little chilly, nothing we cant endure. see everyone in the morning any time after 0800 or 8:00 am for those that dont use a 24 hour clock.

ed and duncan too
Author:  DarksideHybrid [ Fri Mar 25, 2011 9:45 am ]
Post subject:  Re: Work Party March 26
:?: I'd like to help out, just tell me where to show up :D
Author:  Rubicon Bob [ Fri Mar 25, 2011 10:46 am ]
Post subject:  Re: Work Party March 26
DarksideHybrid wrote:
:?: I'd like to help out, just tell me where to show up :D

PM sent.
Author:  brad/duuuude [ Sat Mar 26, 2011 4:54 pm ]
Post subject:  Re: Work Party March 26
Thanks to everyone for the help in putting the new springs on D.D. today. Thanks ed and Dunc for the use of the driveway and garage. Good to get out and see everyone again.
Author:  Justin [ Mon Mar 28, 2011 6:10 am ]
Post subject:  Re: Work Party March 26
Thanks Ed and Dunc :D It was fun and I learned a new area of maintenance. Brakes :?
Author:  DarksideHybrid [ Wed Mar 30, 2011 10:22 am ]
Post subject:  Re: Work Party March 26
:D We need to have more work parties, after saturdays party I found myself down right inspired! :D Sunday I pulled my carb, intake/exhaust manifold and valve cover to change their respective gaskets, while I had things apart I figured I'd spray a little paint under the hood, if only I'd been this motivated when I first bought this jeep :lol: thanks for the inspiration, click the pick.
Image
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/