Nevada Backroaders http://nevadabackroaders.com/phpbb3/ |
|
Truck Mod help http://nevadabackroaders.com/phpbb3/viewtopic.php?f=12&t=2316 |
Page 1 of 1 |
Author: | tacotim [ Fri Jul 03, 2009 1:08 pm ] |
Post subject: | Truck Mod help |
I could use some help installing some stuff for my Tacoma a have a pair of bolt on sliders I need to install probably going to need some help with those Im willing to buy some Jackstands for this if I cant borrow some or a floor jack. and someone with a right angle drill to help drill the bumper to relocate my winch soleniod pack while Im at that I want to switch out my steel fairlead rollers and install delrin ones and swap out a 5/16 wire rope for 3/8 Amsteel line Need 90 degree circlip pliers for this which I will purchase and finally wire a pair of driving lights (I have the harnesses) I could probably do all of it except the sliders by myself. but having help never hurts. Id like to get it all done by the white pine run . Should have time next week in the afternoons |
Author: | scuba steve [ Sat Jul 04, 2009 7:14 pm ] |
Post subject: | Re: Truck Mod help |
Tim, if I was there I'd give you a hand since we both have the same rig. I'm bringing my TJ to Ely only because I can flat tow it. I'd rather be using my Taco. Next time I'm in Vegas with my Tacoma I'll look you up. I could use some pointers on some other mods I have in mind. |
Author: | tacotim [ Tue Jul 07, 2009 7:58 pm ] |
Post subject: | Re: Truck Mod help |
How do you like your best top steve ? we'll talk Taco mods when I get up there on the 23rd. |
Author: | scuba steve [ Wed Jul 08, 2009 9:39 pm ] |
Post subject: | Re: Truck Mod help |
I like it. It's well made plus I can remove it in about 10 minutes. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |