I could use some help installing some stuff for my Tacoma
a have a pair of bolt on sliders I need to install probably going to need some help with those Im willing to buy some Jackstands for this if I cant borrow some or a floor jack.
and someone with a right angle drill to help drill the bumper to relocate my winch soleniod pack
while Im at that I want to switch out my steel fairlead rollers and install delrin ones and swap out a 5/16 wire rope for 3/8 Amsteel line Need 90 degree circlip pliers for this which I will purchase
and finally wire a pair of driving lights (I have the harnesses)
I could probably do all of it except the sliders by myself. but having help never hurts.
Id like to get it all done by the white pine run .
Should have time next week in the afternoons
_________________ 08 TRD Taco: SSMica Xcab 4WD 4.0 V6 6sp OC-TO IVD: Coilovers, UCAs, remote res shocks & 3AAL Pack+TSB leafs 265/75r16 BFG KM2s+TRD alloys, BudBuilt Skids ARB bumper, X9, IPFxsd900, DeMello sliders, AP rear plate bumper
|