Nevada Backroaders
http://nevadabackroaders.com/phpbb3/

Work Party 7/12 UPDATED
http://nevadabackroaders.com/phpbb3/viewtopic.php?f=12&t=1805		 Page 2 of 2
Author:  Rubicon Bob [ Fri Jul 11, 2008 12:23 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
Deven, from Truckworks, Has offered the use of his shop for the work party.

Truckworks is located at Cheyenne & Simmons, behind the gas station, SE corner. Starting time will be the same. 7:30 am.
Author:  Rick & Patti [ Fri Jul 11, 2008 1:53 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
Bob, I would be there, but have visitors from 2 different states in town.

Rick
Author:  LV Cabbie [ Fri Jul 11, 2008 9:48 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
That's great news Bob !! A lift and a transmission jack will make this job a 2 hour project ! I've changed tranys in that amout of time (way back when) at Pep Boys as a service manager.. Much easier and safer than the driveway job... Well,, maybe a 3 hour job with the transfer case and extra drive shaft... Whatever,, who cares,, I'll be there to do whatever I can do.. I feel the need to "turn some wrenches" !!! Phil
Author:  Justin [ Sat Jul 12, 2008 11:40 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
We got DIRTY :twisted: Turns out its a twelve hour job :lol: .

Did it get home Bob?
Author:  LV Cabbie [ Sun Jul 13, 2008 12:21 am ]
Post subject:  Re: Work Party 7/12 UPDATED
Bob,, sorry I misjudged the time thing for this project !! What a great 'work force' showed up !! Ed, John, Tim, Jed, Justin & you !! I was just there as 'photographer-assistant'.. Sorry I couldn't have done more, but there was so little room under there.. Thanks Deven for the use of the shop & lift.. It was fun to watch..

Check out the photos & vids.

Click here >>> Image

Maybe Deven will find the starter bolts... Enjoy Phil
Author:  Rubicon Bob [ Sun Jul 13, 2008 1:33 am ]
Post subject:  Re: Work Party 7/12 UPDATED
A big THANKS goes out to all that helped. Ed, John, Tim, Phil, Jed, Justin & Angie and to Deven for letting us make a mess in his shop. :D Yes, it did take longer than planned. But considering none of us had ever had to pull a trans out of a Jeep, I think it went very well. And yes the Jeep made it back home just fine.
Author:  jed [ Sun Jul 13, 2008 1:56 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
Glad your back up Bob. I don't even have any knot's on my head. Deven- your generosity is awesome :!:
Author:  mac [ Sun Jul 13, 2008 5:16 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
Rubicon Bob wrote:
A big THANKS goes out to all that helped. Ed, John, Tim, Phil, Jed, Justin & Angie and to Deven for letting us make a mess in his shop. :D Yes, it did take longer than planned. But considering none of us had ever had to pull a trans out of a Jeep, I think it went very well. And yes the Jeep made it back home just fine.



Bob,

good to hear the Jeep is repaired.

Deven <--------U ROCK!

:mrgreen:
mac
Author:  Vegasjeep [ Sun Jul 13, 2008 6:36 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
Glad it seems to be doing great! I was so worried on that first start up but after listening to the sound it seemed easily repairable which it was. :wink:

Talk about a great bunch of guys..............







And gals... :D
Author:  GaryB [ Mon Jul 14, 2008 6:16 pm ]
Post subject:  Re: Work Party 7/12 UPDATED
I never logged in all week, till Saturday, So I missed the info. Though I don't know how much help I might have been, seems I might have torn my rotator cuff :? Anyway glad to hear you guys got it taken care of.
Page 2 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/