Nevada Backroaders
http://nevadabackroaders.com/phpbb3/

work party April 5
http://nevadabackroaders.com/phpbb3/viewtopic.php?f=12&t=1576		 Page 2 of 2
Author:  John and Chris [ Mon Mar 24, 2008 6:58 pm ]
Post subject:  Work Party
Ed...

Sent you a PM.

John 8)
Author:  JJ [ Mon Mar 24, 2008 7:04 pm ]
Post subject: 
Mac, I don't remember, but was your Rubi TJ a 5 speed?

from what I research, the TJs all act different depending on your gearing and tranny.

I was almost willing to live with 32 and 373s, but if 4.10s is about the same, i can live with that.
Author:  Rubicon Bob [ Tue Mar 25, 2008 6:30 pm ]
Post subject: 
Unfortunately, I won't be able to make it to the work party. :cry: I leave this weekend to install a bunch of new games in SoCal. Hopefully, I will be back on Saturday. I might try to stop by if I get home early enough.
Author:  mac [ Tue Mar 25, 2008 6:54 pm ]
Post subject: 
JJ wrote:
Mac, I don't remember, but was your Rubi TJ a 5 speed?

from what I research, the TJs all act different depending on your gearing and tranny.

I was almost willing to live with 32 and 373s, but if 4.10s is about the same, i can live with that.


JJ

my Rubi was an Auto
with 4.10
Author:  andy02 [ Wed Mar 26, 2008 5:44 pm ]
Post subject: 
Ed,

Will you be able to do the brackets for my seats at this time even though I'm in Korea? Joe has the Jeep and the seats if you need anything.

Sheila
Author:  JeepinJoe02 [ Wed Mar 26, 2008 11:08 pm ]
Post subject: 
andy02 wrote:
...Joe has the Jeep and the seats if you need anything.

Sheila


I do??

















Image It's safe and sound...
Author:  ed beaumont [ Thu Mar 27, 2008 8:24 am ]
Post subject:  work party
Sheila sent you a pm

ed
Author:  JJ [ Thu Mar 27, 2008 8:55 am ]
Post subject: 
mac wrote:
JJ wrote:
Mac, I don't remember, but was your Rubi TJ a 5 speed?

from what I research, the TJs all act different depending on your gearing and tranny.

I was almost willing to live with 32 and 373s, but if 4.10s is about the same, i can live with that.


JJ

my Rubi was an Auto
with 4.10



okay, but I have the 5 speed and from what I can tell, 4.56 is what I should have.

I dunno. I'll, decide when I drive it with the 410s (I figure I'll add lockers sooin, so if I go 456 that will be the time to do it).
Author:  jed [ Sun Mar 30, 2008 1:29 pm ]
Post subject: 
Ed--sent you a pm. Jed
Author:  Mike & Keir [ Tue Apr 01, 2008 11:43 pm ]
Post subject: 
What time is this Party starting ? I'm hoping to make this one. Keeping fingers crossed.
Author:  ed beaumont [ Wed Apr 02, 2008 8:44 am ]
Post subject:  work party
starttime is 0800 , 0830 somewherein that neighberhood, not like we are punching a time clock or anything like that

ed
Author:  LV Cabbie [ Sat Apr 05, 2008 7:57 pm ]
Post subject: 
What a fun day !!! And a whole lot of work got done !!! The KFC for lunch hit the spot,,, thx Ed & Char... I didn't do much of the work, but I enjoyed the day.. Here are my pix from today... JJ's are form 1-20,, Justin's are 21-35, Frog's are 36-44, and Dave's HD are 45-46... I wish that I could be there for the completion of JJ's 8.8 install,, but ,, alas,, I had to leave... It will be finished tomorrow I guess,, by the amount still to do as of when I left... These parties are so neat, and so much gets done... Enjoy... Phil

Click here >> Image
Author:  JJ [ Sat Apr 05, 2008 8:18 pm ]
Post subject: 
okay, we called it a night and did not finish the axle.

but most of the brackets are welded on, the axle is centered, and lemme tell you it's BEEFY.

we still have to get the spring mounts done and the brakes and bolt everything up. I won't have an e-brake for awhile since I neglected to order an adapter from MORE, but that's easily done.

may have to get some primer and flat black first to prevent rust.
Author:  Justin [ Sun Apr 06, 2008 8:31 am ]
Post subject: 
Thanks again for the Party Ed!
Page 2 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/