Nevada Backroaders
http://nevadabackroaders.com/phpbb3/

work party Feb 16
http://nevadabackroaders.com/phpbb3/viewtopic.php?f=12&t=1465
Page 1 of 2

Author:  ed beaumont [ Mon Jan 07, 2008 9:38 am ]
Post subject:  work party Feb 16

it has been requested by a few that we need to have a work party. Feb 16 Saturday around 0830. pm or email if you need directions.

ed

Author:  bethseptember [ Mon Jan 07, 2008 12:51 pm ]
Post subject:  work party

i'll be there ed, have a project in mind.
want to switch out the kc daylighters from the bumper for some slim lines i can use driving around streets here in vegas.
see ya on saturday.

Author:  Afrog [ Mon Jan 07, 2008 5:08 pm ]
Post subject: 

I'll need directions. Don't have any projects lined up right now, but might have some brighter headlights and driving lights to install by then. If that doesn't gel, then at least I'll have a spare set of hands for wrenching.

Author:  brad/duuuude [ Mon Jan 07, 2008 5:56 pm ]
Post subject: 

hey ed, you got some good lights for the driveway since you posted the time as 08:30 PM. :lol: i'm guessing you mean AM :wink:

Author:  ed beaumont [ Mon Jan 07, 2008 6:04 pm ]
Post subject:  work party

Brad, I can't resist. there is a period after 0830. then pm or email me. You made me look back to double check. I know that you were just testing me just cause I can't type or spell

Author:  Lucy [ Mon Jan 07, 2008 6:33 pm ]
Post subject: 

Boo Hoo! :cry:
I'll be out of town that weekend and won't be available to lend moral support or provide food! I'm hoping nobody will starve...

Author:  brad/duuuude [ Mon Jan 07, 2008 7:14 pm ]
Post subject: 

oh man do i feel stupid!!!!! :shock: :oops: i could say i knew that but actually i didn't. guess i need to go back to school and learn to read all over again. darn puncuation. my bad. 8)

Author:  John and Chris [ Mon Jan 07, 2008 9:14 pm ]
Post subject:  Work Party

I have to admit, I had to look twice at Ed's posting. :shock: I too thought Ed ment 8:30 at night. Then I noticed the period and the 0 in front of the 8:30. I do have that skid plate for under the oil pan I've been meaning to put on. :roll: I'm not sure where the hardware for it is, but I'm sure I can get what I need at the hardware store. I'll be there. John 8)

Author:  mac [ Mon Jan 07, 2008 9:14 pm ]
Post subject: 

Lucy wrote:
Boo Hoo! :cry:
I'll be out of town that weekend and won't be available to lend moral support or provide food! I'm hoping nobody will starve...


What..............no Cookies
:cry:

Author:  JJ [ Tue Jan 08, 2008 12:06 am ]
Post subject: 

I'll bring cookies.

Author:  Afrog [ Wed Jan 09, 2008 11:02 am ]
Post subject: 

Ed,

There might be a chance that I'll have a replacement header for the cracked one I've currently got...

Can your garage party handle something like this? I hear it's quite the involved process. If so, is there something I can do/get to help with the motivation? :)

Author:  Maureen [ Wed Jan 09, 2008 11:37 am ]
Post subject: 

Did somebody say "Work Party" ;)

Did someone also say "cracked header"? :-( (Oh no, Frog!!)

I'm not a mechanical wizard by any stretch of the imagination, but I am willing to learn and always will help out a friend in need.

I know that I am going to need to replace the skid plate over my gas tank- it got mashed pretty good before I splurged on lifting up my baby Jeep. :) It isn't critical, but more of a "would be nice".

If the major surgery on Frog's jeep is going to go on here, definately count me in for help. even if the way that I can best help is by adminstering doses of homemade fudge (I don't usually advertise, but I have some skills of my own in the kitchen) while learning what I can. LOL

Author:  Trukdj [ Wed Jan 09, 2008 6:45 pm ]
Post subject: 

I could show up and be the irritating Guy that always says you should do it this way , not that way.

Author:  Rubicon Bob [ Wed Jan 09, 2008 6:56 pm ]
Post subject: 

Trukdj wrote:
I could show up and be the irritating Guy that always says you should do it this way , not that way.

You mean like normal. :lol: :lol: :lol:

Author:  Trukdj [ Thu Jan 10, 2008 8:23 pm ]
Post subject: 

Yeah! :shock:

Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/